HAAS + SOHN HSP 2.17 Installation And Operating Instructions Manual
Also see for HSP 2.17: Equipment sheet
                               | |
Contents
| 
96.3. Standard screen /welcome pageThis page will always be displayed when the power plugis connected to the power outlet.On MenuOff16:1822°C23°C6.3..1 Room temperature display in energy savingmodeThe energy saving mode is activated after a fewminutes. In the energy saving mode, the current roomtemperature is shown on the display.23°CNote:By pressing any key, appears after about 3 secondsthe display turn to standard screen.6.3..2 Setting the operating mode „On“Procedure:Press the left button to switch the stove in operation.Now the boot process begins with the launch zone 1Off MenuStart zone 108:1326°C23°C6.3..3 Setting target room temperatureProcedure:By pressing the middle button + and -you adjust the room temperature. By pressingthe "OK button“ ✔the set value is stored+ - OKOFF08:1528°C23°C6.4. Main menuBy pressing the right button ✔the standard screen will appear.This menu is a scrolldown menuThis menu is shown as a scrolldown menuOKHeating curveECO-ModeMain menuDate/TimeLanguage englishIt contains the entries: Date/Time Setting the language ECO mode setting Contrast Heating curve Software versionProcedure:By pressing the middle button – and +you select the desired line. |
Related manuals for HAAS + SOHN HSP 2.17
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine