HAI SECURITY SYSTEM Owner's Manual

Also see for 21A00-1 OmniLT: Owner's manual

Contents

HAI SECURITY SYSTEM Owner's Manual Manual pdf 11 page image

2 = NIGHTThe NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors,windows, and non-sleeping area (i.e. downstairs) motion detectors are armed. In the Night mode, there is no entry delay. Thealarm system sounder will be activated immediately if any door, window, or non-sleeping area (motion detector) is tripped.3 = AWAYUse the AWAY mode when you leave your house and no one is home. All doors, windows, and motion detectors are armed. Allzones have an Exit Delay so that you will have time to leave and close the door after you arm the system. The system will befully armed after the Exit Delay. There is an Entry Delay on the Entry-Exit zones in the Away mode, so that you will have timeto turn the system off when you return through your door.Note that the Entry Delay only applies if you come in through an Entry-Exit zone. If someone attempts to climb into a window,or if an interior zone is tripped before the Entry-Exit zone, the alarm will be activated immediately. If you do enter through anEntry-Exit zone first, then the other zones are disabled during the Entry Delay, in case you have to cross through another zone toget to your console (an interior motion detector, for example).4 = VACATIONThis mode arms all doors, windows, and interior motion detectors (same as Away mode). There is an Entry Delay on the Entry-Exit zones. Use this mode when you are leaving for a period of days.5 = DAY INST (DAY INSTANT)Functions same as Day mode, however, there is no Entry Delay on any of the security zones. There will be an instant alarm if anyof the zones are violated while in this mode.6 = NIGHT DLY (NIGHT DELAY)Functions same as Night mode, however, there is an Entry Delay on the Entry-Exit zones. Use this mode if you are going to sleepbut a family member is expected home at a later time.To arm the system into one of the 6 security modes, from the security menu, choose the security mode and press the appropriatekey (1 - 6).Enter your user code number on the console keypad.The console will beep once and the console LED will be set to red. The top line will display the security mode. The bottom linewill display, " *** ARMING SYSTEM *** " to indicate that the system is being armed. The system will be fully armed after theExit Delay expires. If arming in Away or Vacation mode and Audible Exit Delay is enabled, the console will beep until the ExitDelay has expired. During the last 10 second of the Exit Delay, the console will beep twice as fast so leave and close the doorpromptly.Using Shortcut KeysThere are three shortcut keys on the console to arm the system in the Day, Night, and Away security modes, and Off to disarm,without having to go into the security menu.From the top-level display, press one of the shortcut security keys. Enter your code number on the console keypad.The console will beep once and the console LED will be set to red. The top line will display the security mode to indicate thatyou have correctly armed the system. The system will be fully armed after the Exit Delay expires.The programmed Entry Delay is __________ seconds.The programmed Exit Delay is __________ seconds.7