HAI SECURITY SYSTEM Owner's Manual

Also see for 21A00-1 OmniLT: Owner's manual

Contents

HAI SECURITY SYSTEM Owner's Manual Manual pdf 24 page image

¾ 5 (RMP) does not affect CentraLite units.¾ Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18hours.¾ Press # (STA) to see the status (On or Off) of a CentraLite device.Controlling RadioRA UnitsEntry Lights0=OFF 1=ON 2=DIM 3=BRT ↓Entry Lights4=LVL 5=RMP 9=TIM #=STA↑¾ Press 0 (OFF) to turn the selected unit off¾ Press 1 (ON) to turn the selected unit on.¾ 2 (DIM) does not affect RadioRA units.¾ 3 (BRT) does not affect RadioRA units.¾ Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%).¾ 5 (RMP) does not affect RadioRA units.¾ Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18hours.¾ Press # (STA) to see the status (On or Off) of a RadioRA device.Note: When a RadioRA device transmits a signal (i.e. Switch or Dimmer is turned on or off locally, Mater Control button ispressed, or Phantom Button is executed), OmniLT will automatically update the status of each affected device.Controlling ALC or X-10 UnitsEntry Lights0=OFF 1=ON 2=DIM 3=BRT ↓Entry Lights4=LVL 5=RMP 9=TIM #=STA↑¾ Press 0 (OFF) to turn the selected unit off.¾ Press 1 (ON) to turn the selected unit on.¾ Press 2 (DIM) to dim the selected unit (1-9 steps, each step is 10% from its current level).¾ Press 3 (BRT) to brighten the selected unit (1-9 steps, each step is 10% from its current level).¾ Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%).¾ Press 5 (RMP) to ramp the lighting level of an ALC Dimmer Switch to a new level at a selectable ramp rate.• 5 (RMP) does not affect X-10 units.¾ Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18hours.¾ Press # (STA) to view the current status of the unit.20