Skx Owner’s Manual120LOADING THE SETUPLocate the SETUP mode. A Setup file will displayed.Select the Setup file to load with the [],[] buttons or the[VALUE] knob.NOTE: If you do this operation, the settings in the SKX are replacedwith the newly loaded setups. You should save importantdata beforehand (p. 118).Press the [ENTER] button. The Setup is loaded.In case of the WHOLE file, loading can take up to a maximum30 minutes.DELETING THE SETUPSelect the setup file to delete with the [],[] buttons or the[VALUE] knob.Press [] button twice. “[ENT] to Delete” is displayed.Press the [ENTER] button. “Delete?” is displayed. Nowpress the [ENTER] button again. The setup is deleted.NOTE: If you do not with to delete the setup, touch the [MENU/EXIT]button.INSERT THE USB FLASH DRIVEMake sure that the USB Flash drive is correctly inserted.LOCATE THE SETUP MODESELECT THE SETUP FILEPRESS [ENTER] TO DECIDEINSERT THE USB FLASH DRIVEMake sure that the USB Flash drive is correctly inserted.Locate the SETUP mode. A Setup file will displayed.LOCATE THE SETUP MODESELECT THE SETUP FILESELECT THE OPERATIONPRESS [ENTER] TO DECIDE
