99Setting the ParametersREVERBIn this mode, you set the Reverb effect.Reverb is common with the Organ and Extra Voice sections, the single reverb controlsection affects both.To locate this mode:DEPTHTh is sets the depth (volume) of the Reverb Effect.Th e setting range is 0 to 127. This parameter is linked with the [REVERB DEPTH]knob on the top panel.TYPETh is sets the types of Reverb Effect.Room 1: Small roomRoom 2: Large roomLive: Ambient roomHall 1: Large HallHall 2: Small HallChurch: ChurchPlate: Iron-plate ReverbSpring: Spring ReverbDelay: DelayPanDly: Panning DelayRevDly: Reverb + DelayREVERB TIMEWhen the Type (#2) is set at Room 1 to Spring, The decay of the Reverb is attenu-ated.Th e setting range is 0 to 127. The decay becomes greater as the value is increased.DELAY TIMEWhen the Type (#2) is set at Delay, PanDly, RevDly, this sets the delay time.Th e setting range is 4.7 to 2000ms. The delay becomes longer as the number valueis increased.NOTE: You can set the delay time with the foot switch. (P. 76 #2)DELAY FEEDBACKWhen the Type (#2) is at Delay, PanDly, RevDly, it sets the amount of Feedback(How many times the sound repeats.)The setting range is 0 to 96%. The repetition becomes greater as the value is in-creased.NOTE: Type (#2) is a micro-parameter. When you change the type, each reverb parameter(except #1) is automatically set to the recommend value.or, keep pressing the [REVERB ON] button for a few seconds.See “Function mode” (P. 66) for operation details.MENU/EXIT ENTERNOTE: All the parameters in these modes arePatch Parameters. They are recordedinto the Patch.
