81Setting the ParametersVIB&CHO (Vibrato & Chorus)In this mode, the settings specific to Vibrato and Chorus are adjusted.To locate this mode:MODESets the Mode of the Vibrato and Chorus effect.V1 (C1): light vibrato (chorus)V2 (C2): vibrato (chorus) of standard depth.V3 (C3): deepest vibrato (chorus)“Chorus” makes richness to the sound with blending direct andvibrato tone.This Mode can be selected on the top panel by holding each[VIBRATO & CHORUS] button and press [V1] to [C3]button(right figure).RATESets the Speed of the Vibrato and Chorus effect.Th e setting range is 6.10 - 7.25 Hz.VIBRATO - TREMOLOSets Tremolo (amplitude modulation) of the Vibrato and Choruseff ect.Th e setting range is 0 - 15.EMPHASISSets Emphasis (high frequency boost) of the Chorus effect (C1 / C2 / C3).Th e setting range is 0 - 9 dB.MIXSets Mixing ratio of the Chorus effect (C1 / C2 / C3).Th e setting range is D64 (only the Direct tone, no vibrato tone) - EVEN - 63V (onlythe Vibrato tone, no direct tone).PEDALSets Vibrato and Chorus affects on the Pedal part by [LOWER] button.Th e setting range is ON/OFF.DEPTH V1, DEPTH V2, DEPTH V3, DEPTH C1, DEPTH C2, DEPTH C3Sets the Depth of each Vibrato and Chorus effect mode.Th e setting range is 0 - 15.or, keep pressing either of the VIBRATO & CHORUS [UPPER], [LOWER]buttons for a few seconds.See “Function mode” (P. 66) for operation details.MENU/EXIT ENTERNOTE: All the parameters in these modes arePatch Parameters. They are recordedinto the Patch.PEDALOn the vintage B-3/C-3, the Vibrato and Chorusaffects not only LOWER part but also PEDAL partvia [LOWER] (exactly, “GREAT”) tablet by the circuitstructure. It is divided on later models.This parameter simulates that.Setting the Vibrato & Chorus ModePressWith holding
