Skx Owner’s Manual30ALLOCATING THE EXTRA VOICESChoose which parts will play the Extra Voices.[UPPER ON] buttonThe Extra Voices play on the UPPER part.[LOWER ON] buttonThe Extra Voices play on the LOWER part.There are two Extra Voice sections. You can assign these either for Upper or Lowerparts.For this example, switch the [UPPER ON] button for EXTRA VOICE 1 at “ON”.NOTE: You can set that the Organ Voice Section turns “OFF” automatically by the Extra VoiceSection is switched “ON”. (P. 79)SELECT AN INSTRUMENTSELECT A VOICE GROUPPress the [E.PIANO] button.An instrument what used previously in the selected voice groupwill selected automatically.SELECT AN INSTRUMENTSelect “EPiano Rd2” with the [VALUE] knob.Now the “EPiano Rd2” is ready to play.1. Press the [OTHER] button.2. Locate the cursor at voice group with the [] button.3. Select the “Wind” with the [VALUE] knob.4. Locate the cursor at instrument with the [] button.or, Press the [OTHER] button several times after step 1.ADJUST THE VOLUME BALANCETo achieve your desired blend of Organ and Extra Voice (In this example the E.Piano), adjust the Extra Voice volume knob accordingly.The [VOLUME] knob adjusts entire volume of the Extra Voice sections.The [BALANCE] knob adjusts the volume balance between Extra Voice sections 1and 2.Column: To select the other group (e.g.“Wind”)Th e voice group “Wind” is hidden behind the [OTHER] but-ton. To select this;MIXBALANCEEXV1 EXV2MIX MIXMIXBALANCEEXV1 EXV2To choose the Extra Voice instruments, press the desired VoiceGroup button on the top panel, then select your specific instru-ment in the display.Select the “EPiano Rd2” as follows.TRY CREATING YOUR OWN SOUND - continued121234
