5 - Operation56Filtered Fast Fill SystemThe ‘Filtered Fast Fill’ allows the operator to fill the sprayer from anexternal water source (such as a dam or tank) using an auxiliarypump. The system includes a Cam-Lock coupling on the inlet and ahigh capacity in line filter.1. Remove the cover from the Cam-Lock coupling (A) and connecta hose being fed from an auxiliary pump and external watersource.2. Run the auxiliary pump and engage the Quick-Fill ball valve (B)to fill.3. Watch the tank level indicator closely to prevent over filling.4. To stop filling close the Quick-Fill ball valve (B), turn off thepump, disconnect the hose and replace the Cam-lock couplingdust cover.μ ATTENTION! The optional flow meter is only available onsprayers with the “Quick-Fill” system and is not offered onmachines with venturi or Banjo pump fast fill systems.± WARNING! Do not leave the sprayer while filling the tank and watch the level indicator closely to prevent over filling..μ ATTENTION! Due to risk of contamination it is prohibited in some areas to fill a sprayer from open water ways such aslakes and rivers etc. Contact your local authorities for information about laws specific to your area.Directional fill valve (optional)The Filtered Fast Fill System can by equipped with a “Directional FillValve“(C). By turning the valve system can be used to fill either “MainTank” or “Rinse Tank”. The operator can control the speed at whichfilling takes place by adjusting the quick fill ball valve on the sprayer.
