Hardi NAVIGATOR 4000 Instruction Book

Also see for NAVIGATOR 3000: Supplement to Instruction book Instruction book Operator's manual

Contents

Hardi NAVIGATOR 4000 Instruction Book Manual pdf 75 page image

5 - Operation73Cleaning the Tank and Liquid Systemμ ATTENTION! Thorough cleaning of the sprayer is to be carried out when shifting to crops, which are very sensitive tochemicals just sprayed, or prior to storage for a longer period of time.÷ NOTE! Prior to the described cleaning, a standard cleaning should be carried out.• Select and use the appropriate protective clothing. Select detergent suitable for cleaning and suitable deactivatingagents if necessary.• Rinse and clean sprayer and tractor externally. Use detergent if necessary.1. Remove tank filters and suction filters and clean the sprayer. Be careful not to damage the filter mesh. Put back thesuction filter top. Put back all filters, when the sprayer is completely clean.2. With the pump running, rinse the inside of the tank. Do not forget to clean the tank roof. Rinse and operate allcomponents and any equipment, which have been in contact with the chemical. Before opening the distributionvalves and spraying the liquid out, decide whether this should be done in the field or on the seepage location.3. After spraying the liquid out, stop the pump and fill at least 1/5 of the tank with clean water. Note that some chemicalsrequire the tank to be completely filled. Add appropriate detergent and/or deactivating agent, e.g. washing soda ortriple effect ammonia. Special detergents for sprayer cleaning is recommended as some also lubricate ball valves etc.4. Start the pump and operate all controls enabling the liquid to come into contact with all the components. Operatethe distribution valves as the last thing. Some detergents and deactivating agents work best, if they are left in the tankfor a short period. Check the label.5. Drain the tank and let the pump run dry. Rinse inside of the tank, again letting the pump run dry.6. Stop the pump. If the pesticides used have a tendency to block nozzles and filters, remove and clean themimmediately.7. Put back all the filters and nozzles and store the sprayer. If it is noted, from previous experiences, that the solvents inthe pesticides are particularly aggressive, store the sprayer with the tank lid open.μ ATTENTION! It is advisable to increase the forward speed (double, if possible) and reduce the spraying pressure to 1.5bar, when spraying diluted remaining liquid in the field just sprayed.μ ATTENTION! If a cleaning procedure is given on the chemical label, follow it closely.μ ATTENTION! If the sprayer is cleaned with a high pressure washer, lubrication of the entire machine is recommended.Cleaning and Maintenance of FiltersClean filters ensure:• Sprayer components such as valves, diaphragms and operating units are not hindered or damaged during operation.• Nozzle blockades do not occur whilst spraying.• Long life of the pump. A blocked suction filter will result in pump cavitation. The main filter protecting sprayercomponents is the suction filter. Check it regularly.