Technical Specifications33Audio SectionStereo ModeContinuous Average Power (FTC)70 Watts per channel 20Hz–20kHz:@ < 0.07% THD, both channels driven into 8 OhmsFive-Channel Surround ModePower Per Individual ChannelFront L&R channels:65 Watts per channel,@ 0.07% THD, 20Hz–20kHz into 8 ohmsCenter channel:65 Watts, 20Hz–20kHz into 8 ohmsSurround channels:65 Watts per channel, 40Hz–20kHz into 8 ohmsInput Sensitivity/ImpedanceLinear 220mV/50 KohmsSignal-to-Noise Ratio (IHF-A)Linear 95dBSurround System Adjacent Channel SeparationAnalog Decoding (Pro Logic, etc.) 40dBDolby Digital (AC-3) 55dBFrequency Response@ 1W (+0, –3dB) 7Hz–80kHzHigh InstantaneousCurrent Capability (HCC) ±65 ampsTransient IntermodulationDistortion (TIM) UnmeasurableRise Time 16 μsecSlew Rate 40 V/μsecFM Tuner SectionFrequency Range 87.5–108.0 MHzUsable Sensitivity IHF 1.3 μV/13.5dBfSignal-to-Noise Ratio Mono/Stereo 76/68dBDistortion Mono/Stereo 0.2/0.5%Stereo Separation 1kHz 40dBSelectivity ±400kHz 65dBImage Rejection 98MHz 50dBTuner Output Level 1kHz, ±75kHz Dev 800mVAM Tuner SectionFrequency Range 520–1710kHzSignal-to-Noise Ratio 50dBUsable Sensitivity Loop 500μVDistortion 1kHz, 30% Mod 0.5%Selectivity ±20kHz 70dBVideo SectionTelevision Format NTSCInput Level/Impedance 1Vp-p/75ohmsOutput Level/Impedance 1Vp-p/75ohmsVideo Frequency Response 10Hz to 8MHz (-3dB)S/N 65dBGeneralPower Requirement AC 120V 60HzPower Consumption 80W idle, 325W maximum(2 channels driven)Dimension (Max)Width 17.4 inches (440 mm)Height 6.3 inches (160 mm)Depth 18.0 inches (459 mm)Weight 32.6 lbs. (14.8 kg)Depth measurement includes knobs, buttons and terminal connections.All features and specifications are subject to change without notice.*Trademarks of Dolby Laboratories.†DTS is a trademark of Digital Theater Systems.††UltraStereo is a trademark of UltraStereo Corp.