Harman Kardon AVR 8000 Owner's Manual

Also see for AVR 8000: Brochure & specs Specifications Service manual Service manual

7 FRONT PANEL INFORMATION DISPLAYFront Panel Information DisplayABDEKL FHIJCGA Upper Display LineB Lower Display LineC OSD IndicatorD Multiroom IndicatorE Speaker/Channel Input IndicatorsF PRESET IndicatorG MEMORY IndicatorH STEREO IndicatorI TUNED IndicatorJ AUTO IndicatorK 192kHz IndicatorL 96kHz IndicatorA Upper Display Line: Depending on the unit’sstatus, a variety of messages will appear here. Innormal operation, the current input source namewill appear on this line.B Lower Display Line: Depending on theunit’s status, a variety of messages will appearhere. In normal operation, the current surroundmode name will appear on this line.C OSD Indicator: When the OSD system is inuse, this indicator lights to remind you that theother indicators in this display do not functionwhen the On-Screen Display is being used.D Multiroom Indicator: This indicator lightswhen the multiroom system is active. Note thatit will remain lit when the multiroom system isin use even though the main room system is inthe Standby mode and all other indicators aredark. (See page 38 for more information on theMultiroom system.)E Speaker/Channel Input Indicators: Theseindicators are multipurpose, indicating either thespeaker type selected for each channel or theincoming data-signal configuration. The left,center, right, right surround and left surroundspeaker indicators are composed of three boxes,while the subwoofer is a single box. The centerbox lights when a “Small” speaker is selected,and the two outer boxes light when “Large”speakers are selected. When none of the boxesare lit for the center, surround or subwooferchannels, no speaker has been selected for oneof those positions. (See page 21 for more infor-mation on configuring speakers.) The lettersinside each of the center boxes display the activeinput channels. For standard analog inputs, onlythe L and R will light, indicating a stereo input.When a digital source is playing, the indicatorswill light to display the channels being receivedat the digital input. When the letters flash, thedigital input has been interrupted. (See pages25 & 32 for more information on the ChannelIndicators.)F PRESET Indicator: This indicator lightswhen the tuner is in use to show that thepresent number for the current station beinglistened to appears in the Upper Display Line.(See page 34 for more information on tunerpresets.)G MEMORY Indicator: This indicator flasheswhen entering presets and other informationinto the tuner’s memory.H STEREO Indicator: This indicator lightswhen an FM station is being tuned in stereo.I TUNED Indicator: This indicator lights whena station is being received with sufficient signalstrength to provide acceptable listening quality.J AUTO Indicator: This indicator lights whenthe tuner’s Auto mode is in use.K 192kHz Indicator: This indicator lightswhen the input source has a 192kHz bit rate.L 96kHz Indicator: This indicator lightswhen the input source has a 96kHz bit rate.