Harman Kardon AVR80II Owner's Manual

Also see for AVR 80 II: Owner's manual

Harman Kardon AVR80II Owner's Manual Manual pdf 9 page image

Front Panel Information Display¡ “Visual” Indicator: These indica-tors display which input source isbeing fed to the video monitor output.™ Test: This indicator flashes whenthe output levels are being set usingthe built in test signal generator.£ Memo: This indicator flasheswhen the Memo button is pressedwhen entering presets and otherinformation into the tuner’s memory.¢ Auto: This indicator signifies thatthe Automatic Tuning mode is in usefor FM broadcasts.∞ Tuned: This indicator lights whenan AM or FM station is properlytuned and locked.§ Stereo: This indicator lightswhen an FM station is broadcastingin stereo.¶ Volume indication: The last twoindicators on the information displayindicate the volume level. Note that0dB is the reference level, not anindication that there is no output.• Tuner Frequency Indication:When the tuner is in use, the mainInformation Display will show thepreset channel number, if any, thefrequency band and the station fre-quency. Indicators at the right sideof the display show kHz when an AMstation is tuned or MHz when an FMstation is tuned.ª Main Information Display: Thisten digit display shows messagesrelating to the status, input source,surround mode, tuner, volume levelor other aspects of unit’s operation.‚ Multi: This indicator signifies thatthe AVR80II is sending a programsource to a remote room location.Note that it may be illuminated evenwhen the unit is “off” in the main lis-tening room, signifying that opera-tion continues at another location.When a remote command is beingreceived via the Multi IR connection,this indicator will flash.⁄ Mode Status: These indicatorsdisplay the currently selectedsurround mode.¤ DISP: This indicator lights whenthe FL display has been turnedoff using the Display button ) toremind you that the unit is stillturned on.‹ Copy Indicators: The TAPECOPY indicator lights when an inputother than the current source hasbeen selected to copy Tape 1. TheVCR COPY1 indicator signifies thatthe input to VCR 1 is other than thecurrently selected source.› P-Scan: This indicator flasheswhen the stations programmed intothe tuner memory are being auto-matically reviewed.fi Auto Memo: This indicator flash-es when the tuner is automaticallyscanning for stations and enteringthem into the preset memory.fl Signal Level Indication: This isa visual indication of the strength ofa radio station signal. The more barsvisible, the stronger the station.7