Safety InformationCleaningWhen the unit gets dirty, wipe it with aclean, soft dry cloth. If necessary, wipe itwith a soft cloth dampened with mildsoapy water, then a fresh cloth with cleanwater. Wipe dry immediately with a drycloth. NEVER use benzene, aerosolcleaners, thinner, alcohol or any othervolatile cleaning agent. Do not useabrasive cleaners, as they may damagethe finish of metal parts. Avoid sprayinginsecticide near the unit.Moving The UnitBefore moving the unit, be certain to dis-connect any interconnection cords withother components, and make certainthat you disconnect the unit from the ACoutlet.Important information for the userNOTE: This equipment has been testedand found to comply with the limitsfor a Class B digital device, pursuant toPart 15 of the FCC Rules. The limits aredesigned to provide reasonable protectionagainst harmful interference in aresidential installation. This equipmentgenerates, uses and can radiate radiofrequency energy and, if not installed andused in accordance with the instructions,may cause harmful interference to radiocommunication. However, there is noguarantee that harmful interference willnot occur in a particular installation.If this equipment does cause harmfulinterference to radio or television recep-tion, which can be determined by turningthe equipment off and on, the useris encouraged to try to correct the inter-ference by one or more of the followingmeasures:n Reorient or relocate the receivingantenna.n Increase the separation between theequipment and receiver.n Connect the equipment into an outleton a circuit different from that towhich the receiver is connected.n Consult the dealer or an experiencedradio/TV technician for help.This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept interferencereceived, including interference that maycause undesired operation.NOTE: Changes or modifications maycause this unit to fail to comply withPart 15 of the FCC Rules and may voidthe user’s authority to operate theequipment.UnpackingThe carton and shipping materials usedto protect your new receiver during ship-ment were specially designed to cushionit from shock and vibration. We suggestthat you save the carton and packingmaterials for use in shipping if you move,or should the unit ever need repair.To minimize the size of the carton instorage, you may wish to flatten it. Thisis done by carefully slitting the tapeseams on the bottom and collapsing thecarton down to a more two-dimensionalappearance. Other cardboard inserts maybe stored in the same manner. Packingmaterials that cannot be collapsedshould be saved along with the carton ina plastic bag.If you do not wish to save the packagingmaterials, please note that the cartonand other sections of the shipping protec-tion are recyclable. Please respect theenvironment and discard those materialsat a local recycling center.Typographic ConventionsIn order to help you use this manualwith the remote control, front panelcontrols, rear panel connections andon-screen menus, certain conventionshave been used.EXAMPLE – (bold type) indicates aspecific remote control or front panelbutton, or rear panel connection jackEXAMPLE – (OCR type) indicates amessage that is visible on the front panelinformation display1 – (number in a square) indicates aspecific front panel controla – (number in an oval) indicates abutton or indicator on the remote¡ – (number in a circle) indicates arear panel connection3