and time, passwords, and any other configuration information you havechanged.Other settings in the Configuration/Setup UtilityprogramThe information in this section includes instructions for changing someother settings in the Configuration/Setup Utility program. (When in theprogram, you can select Help to learn more about items within theprogram.)Changing keyboard speedYou can change the speed at which the keyboard responds when you holddown a key. This setting can be found under Start Options. The defaulttypematic rate is 30 characters per second (fast rate).Setting video memory amountYou can select the amount of system memory that is reserved for theintegrated video. To access this setting, select Devices and I/O Ports, thenVideo Setup. The amount can be set to either 512 KB or 1 MB. (Operatingsystems that use SVGA will allocate additional system memory.)Setting the startup sequenceYour computer can be started from several devices including the hard diskdrive, diskette drive, CD-ROM drive, or from the network. The startupprogram looks for these devices in a selected sequence. You can useConfiguration/Setup Utility program to select the startup sequence.To set the primary startup sequence:1. Start the Configuration/Setup Utility program (see “Starting and usingthe Configuration/Setup Utility program” on page 3).2. Select Start Options and press Enter.3. Select Startup Sequence from the Start Options menu and press Enter.4. Select First Startup Device and press Enter.5. Use the arrow keys to make your selection and press Enter.6. If necessary, repeat the above steps for Second Startup Device, ThirdStartup Device, and Fourth Startup Device.10 Type 6344 User Guide Update
