22 IBM Desktop System HMMHard Disk DevicesDefault is User. Other options are Administrator orNot Required. Function of each parameter is thesame as above.Network DevicesDefault is User. Other options are Administrator orNot Required. Function of each parameter is thesame as above.Remote AdministrationSelect this item to view the Remote Administrationmenu.Remote AdministrationSelect “Enabled” to allow Remote Administration,such as the POST/BIOS Update Utility, to be run froma remote system without requiring entry of yourAdministrator password. Default is Enabled.NOTE: If the Password Prompt is set to “On”, it will bereset when Remote Administration is set toEnabled.Network Boot Integrity ServicesSelect whether to use the Boot Integrity Services(BIS) protocol prior to startup from the network.Before allowing a network startup, BIS ensures thestartup image is valid and is authorized for thissystem. Default is Disabled.Set PasswordsSelect this option to set up the User andAdministrator Passwords.User PasswordSet User PasswordSelect this line to set, change, or delete the Userpassword. Once a User password is set, you will beprompted for this password every time the system isturned on before you can use it. Default is Enter.NOTE: To delete user password, enter blank fields foreach New Password line item.
