IBM System x3200 Installation Manual

Also see for System x3200 4362: Problem determination and service guide User guide

Contents

Removing the two-piece bezelWhen working with some devices, such as drives in bays 1 through 7, you mustfirst remove the two-piece bezel to access the devices.Notes:v Before you remove the upper bezel, you must unlock and remove the side coverand remove the lower bezel.v If you are removing only the lower bezel, you do not have to remove the sidecover. However, the side cover must be unlocked.To remove the two-piece bezel, complete the following steps:1. Unlock the side cover.2. Remove the side cover (see “Removing the side cover” on page 10).3. Press the round blue release button on the right side of the lower bezel and tiltthe lower bezel forward to disengage it from the chassis.4. Lift the lower bezel to disengage the two bottom tabs from the chassis. Set thelower bezel aside.Chapter 2. Installing optional devices 11