816f011b-0701ffff The connector [PhysicalConnectorElementName] configuration error has been repaired. (FrontUSB)Explanation: This message is for the use case when an implementation has detected an Interconnect Configurationwas Repaired.May also be shown as 816f011b0701ffff or 0x816f011b0701ffffSeverity: InfoAlert Category: Critical - OtherServiceable: NoCIM Information: Prefix: PLAT and ID: 0267SNMP Trap ID: 50Automatically notify Support: NoUser response: No action; information only. Front Video :816f011b-0c01ffff The connector [PhysicalConnectorElementName] configuration error has been repaired. (FPLCD Cable)Explanation: This message is for the use case when an implementation has detected an Interconnect Configurationwas Repaired.May also be shown as 816f011b0c01ffff or 0x816f011b0c01ffffSeverity: InfoAlert Category: Critical - OtherServiceable: NoCIM Information: Prefix: PLAT and ID: 0267SNMP Trap ID: 50Automatically notify Support: NoUser response: No action; information only.816f0125-0c01ffff [ManagedElementName] detected as present. (Front Panel)Explanation: This message is for the use case when an implementation has detected a Managed Element is nowPresent.May also be shown as 816f01250c01ffff or 0x816f01250c01ffffSeverity: InfoAlert Category: System - OtherServiceable: NoCIM Information: Prefix: PLAT and ID: 0390SNMP Trap ID:Automatically notify Support: NoUser response: No action; information only.816f011b-0701ffff • 816f0125-0c01ffffAppendix A. Integrated management module II (IMM2) error messages 703
