Customizing the Modem Configuration FilesYou can create your own modem configuration files or modify the samples provided. After you customizeyour modem configuration files, you must access them through the Configure Remote Maintenance PolicyService Aid rather than from the service processor menus.Note: If you have already set up your serial ports, line speeds, authorizations, and telephone numbersfrom the service processor menus, use the service aid to specify your customized modemconfiguration files.If you have not already set up your serial ports, line speeds, authorizations, and telephone numbersfrom the service processor menus, use the service aids to set them while you specify yourcustomized modem configuration files.To disable Auto-Reliable Mode testing of the remote modem, use the sample modem configuration file/usr/share/modems/modem_f.cfg as a model that you can modify, as follows:1. Find the necessary command in your modem manual.2. Copy the /usr/share/modems/modem_f.cfg file to a new file with a different name (for example,modem_fx.cfg).3. In the new file (modem_fx.cfg), change the line Send "ATE0T\r" to Send "ATcccE0T\r" where ccc isthe added command as specified in your modem manual, as follows:Change the third line of each of the following stanzas:v condoutv condinv ripo4. Save the changes.156 pSeries 610 Model 6C3 and Model 6E3 User’s Guide