IBM x3500 - System - 7977 User Manual

Also see for System x3500 Type 7977: Installation guide

Contents

4. Remove the fan air baffle from the fan cage assembly by pushing in on the tabon the back of the air baffle; then, push the baffle to the left and lift it out of thefan cage assembly.5. Install two hot-swap fans in the empty bays of the fan cage assembly.Release latchPower supply6. Remove the power supply and power-supply filler from the server by pressingdown on the release latch while you pull them out.Power-supplycage assemblyPower-supplycage handle7. Lift the power-supply cage handle on the rear of the power-supply cage, androtate the power-supply cage out of the way until it latches in place. Let thepower-supply cage rest on the rear power-supply structure support bracket.8. Install the transition duct on the edge of the DIMM air baffle.Chapter 2. Installing optional devices 43