IBM x3500 - System - 7977 User Manual

Also see for System x3500 Type 7977: Installation guide

Contents

7. Click Next. The “Configuration summary” window opens.8. Review the information in the “Configuration summary” window. To change theconfiguration, click Back.9. Click Apply; then, click Yes when asked if you want to apply the newconfiguration. The configuration is saved in the controller and in the physicaldrives.10. Exit from ServeRAID Manager and remove the CD from the DVD-ROM drive.11. Restart the server.Viewing the configurationYou can use ServeRAID Manager to view information about RAID controllers andthe RAID subsystem (such as arrays, logical drives, hot-spare drives, and physicaldrives). When you click an object in the ServeRAID Manager tree, information aboutthat object appears in the right pane. To display a list of available actions for anobject, click the object and click Actions.Updating IBM DirectorIf you plan to use IBM Director to manage the server, you must check for the latestapplicable IBM Director updates and interim fixes.To install the IBM Director updates and any other applicable updates and interimfixes, complete the following steps.Note: Changes are made periodically to the IBM Web site. The actual proceduremight vary slightly from what is described in this document.1. Check for the latest version of IBM Director:a. Go to http://www.ibm.com/systems/management/downloads.html.b. If the drop-down list shows a newer version of IBM Director than whatcomes with the server, follow the instructions on the Web page to downloadthe latest version.2. Install the IBM Director program.3. Download and install any applicable updates or interim fixes for the server:a. Go to http://www.ibm.com/support/.b. Click Downloads and drivers.c. From the Category list, select xSeries (Intel and AMD processor-based).d. From the Sub-category list, select System x3500 and click Continue.e. In the Search within results field, type director and click Search.f. Select any applicable update or interim fix that you want to download.g. Click the link for the executable (.exe) file to download the file, and followthe instructions in the readme file to install the update or interim fix.h. Repeat steps 3f and 3g for any additional updates or interim fixes that youwant to install.Chapter 3. Configuring the server 75