CABLE DIAGRAMSThe cable diagrams below show the proper routing of the High Cable (31), the Butterfly Cable (32), and the LowCable (33). Use the diagram to make sure that the cables and the cable traps have been assembled correctly. Ifthe cables have not been correctly routed, the weight bench will not function properly and damage may occur.The numbers show the correct route for each cable. Make sure that the cable traps do not touch or bind thecables.1345212Butterfly Cable (32)High Cable (31)Low Cable (33)3451234520 5Before beginning assembly, carefully read thefollowing information and instructions:• Assembly requires two people.• Place all parts in a cleared area and remove thepacking materials. Do not dispose of the packingmaterials until assembly is completed.• Tighten all parts as you assemble them, unlessinstructed to do otherwise.• As you assemble the weight bench, make sure allparts are oriented as shown in the drawings.• For help identifying small parts, use the PARTIDENTIFICATION CHART in the centre of thismanual.The following tools (not included) are requiredfor assembly:• Two adjustable spanners• One rubber mallet• One standard screwdriver• One Phillips screwdriver• Lubricant, such as grease or petroleum jelly,and soapy water.Assembly will be more convenient if you have asocket set, a set of open-end or closed-endwrenches, or a set of ratchet spanners.Make Things Easier for YourselfEverything in this manual is designed to ensurethat the weight bench can be assembled suc-cessfully by anyone. However, it is important torealize that the versatile weight bench has manyparts and that the assembly process will taketime. Most people find that by setting aside plen-ty of time, assembly will go smoothly.ASSEMBLY1.Press a 50mm Square Inner Cap (43) into theend of the Right Base (1).Insert an M10 x 60mm Carriage Bolt (50) upthrough the bottom of the Right Base (1). Lay theBase on the floor.Repeat this step with the Left Base (2).Before beginning assembly, be sure thatyou have read and understand the infor-mation in the box above.112434350Rack Assembly