IDEAL Networks LanXPLORER Pro Manual
Also see for LanXPLORER Pro: Quick reference guide
                                                                | |
Contents
| 
LanXPLORER Pro 150835 Iss 5User Manual Page 183.3 RJ45This menu allows configuration of how the RJ45 interface connects to the network.1. Select Setup.2. Select the menu point "RJ45".3. Select More to display the next page.Option DescriptionAutoNegotiationEnabled: Automatic recognition of the network speed.Disabled: It is necessary to set the communication rate and modemanually.Speed Setting the network speed.Mode Full Duplex (all pairs are used for transmitting and receiving).Half Duplex (pairs are used for transmitting or receiving).Min. Rx Size Smallest recognized packet sizeMDI Configuration of the device interfaceMACError!Bookmark notdefined.Display of MAC address.Link Wait Time Set the time that the tester will wait for Ethernet link establishment beforeit stops searchingMonitor ModeTimeout (s)Set the time that the tester will wait for both sides of the Ethernet to beestablished before reverting to endpoint modeSave the entry made with Apply. You can exit the menu without saving the changes withEscapeFigure 19: RJ45 Settings Figure 20: RJ45 Settings(page 2) |
Related manuals for IDEAL Networks LanXPLORER Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine