IDEAL Networks LanXPLORER Pro Manual
Also see for LanXPLORER Pro: Quick reference guide
                                                                | |
Contents
| 
LanXPLORER Pro 150835 Iss 5User Manual Page 486.12 LoopThis test allows measurement of the network transfer rate. In this test the LanXPLORERserves as a reply box for a measuring instrument with active layer (up to stage 4) (e.g. TrendUnipro or Trend Multipro).The LanXPLORER can be set to one of the following types of loops, preset in the instrument:• Wireline• Mac• IP• UDP6.12.1 Performing test1. Select Setup.2. Set the type of loop specified by the measuring instrument with active layer.3. Save the entry made with Apply. You can exit the menu without saving thechanges with Escape.4. Select Run to start the test.6.13 PC DiagnosisWith this test the LanXPLORER can provide information on the MAC and IP level of theconnected PC. Moreover information is output on data transfer (traffic).1. Select the menu point "PC Diag".2. The traffic is automatically analyzed.Figure 69: PC Diagnosis |
Related manuals for IDEAL Networks LanXPLORER Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine