LanXPLORER Pro 150835 Iss 5User Manual Page 516.15.2 Performing testsThe name of the IP address and of the network is shown on the standby screen with whichthe device has been connected.1. Select the menu point "Tests" on thestandby screen.2. Select the desired individual test. All of thetests are the same as those availablethrough the RJ-45 or Optical ports, withthe addition of the Scan function used tosearch for available Wi-Fi networks.3. Perform the test.The result is stored in the short-term memory anddisplayed in the test summary. Figure 72: Wi-Fi Test results
