IDEAL Networks LanXPLORER Pro Manual
Also see for LanXPLORER Pro: Quick reference guide
                                                                | |
Contents
| 
LanXPLORER Pro 150835 Iss 5User Manual Page 446.7 PING4 & PING6This test checks whether a host is accessible via the network and how long the host requiresto reply under IPv4For this purpose the LanXPLORER sends a preset number of pings to multiple targetaddresses and waits for the replies from the hosts.6.7.1 Performing test1. Select the menu point "Ping".2. Select Setup to define the test parameters.3. Save the entry made with Apply. You can exit the menu without saving thechanges with Escape.4. Select Run to start the test.6.7.2 Display resultsAll of the targets marked for testing are displayed, withthe test result for each target and the overall test result.Select a target and press Enter to display the detailedresult for the target.Image DescriptionTarget Target addressInfoIn Progress – test runningPassed – Test passedUnknown host – address not foundTx Count Pings sent / total number of pingsRx Count Pings receivedDelay Time between sending and receiving pingsFigure 63: Ping test resultFigure 64: Ping test result(page 2) |
Related manuals for IDEAL Networks LanXPLORER Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine