IDEAL Networks LanXPLORER Pro Manual
Also see for LanXPLORER Pro: Quick reference guide
                                                                | |
Contents
| 
LanXPLORER Pro 150835 Iss 5User Manual Page 396.2 AutotestThe autotest feature allows the installation to be checked quickly and easily. After pressingthe AUTOTEST button, the LanXPLORER automatically runs the individual tests set.Selection of the individual tests in the test series depends on the instrument settings and thetype of wiring to be tested.6.2.1 Run Autotest1. Connect the LanXPLORER in the desired manner.2. Set the Autotest options.3. Select Run to start the Autotest.6.2.2 Overall pass/fail resultAfter conclusion of the test series, the LanXPLORERdisplays an overall pass/fail result as well as the individualpass/fail results.Symbol Overall Autotest resultsThe Autotest is evaluated as passed all total,when all individual tests are passed.The Autotest is evaluated as failed all total,when at least one individual test was failed.You can view the results of the individual tests, save theresults or make Autotest settings.6.2.3 Display of individual test results1. Select the desired individual test.2. Select More to view additional details on the specific test results.3. Press Escape to return to the previous screen.6.3 Wiremap testShort circuits, discontinuities and erroneous circuits can be located with the aid of thewiremap test. The test results are displayed in the form of a graph to facilitate evaluation.Any faults indicated in the wiremap test should be remedied before performing further tests,because this would result in errors in the other tests.The wiremap test guarantees the following minimum thresholds for error recognition (basedon four conductor pairs, optional shielding):• All wiring errors or combined wiring errors are indicated in the wiremap as faults.• Combinations of up to three interruptions, short-circuits or reversed connections arerecognized correctly.• In the case of discontinuities or short-circuits, the end of the cable, at which the faultoccurred, is specified (on Autotest screen for length measurement).• Split pairs are recognized on the basis of specific patterns of contradictory NEXTvalues (near-end crosstalk).Figure 56: Autotest -Complete overview |
Related manuals for IDEAL Networks LanXPLORER Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine