LanXPLORER Pro 150835 Iss 5User Manual Page 345.2.2 Testing a passive link with Active RemoteWhen testing a passive link with Active Remote, the instrument tests the connected cablefor:Length;Short-circuit;Pin mixup, split pair;Open / broken conductors;Error location.Item Description1 Active Remote2 Wall Outlet3 Patch Panel4 LanXPLORER1. Select the menu "Ports" "RJ45".2. Disconnect the cable link to be tested from all network components.3. Connect cable path earth to the RJ45 network port on the LanXPLORER.4. Connect a remote / active Remote to the other end of the cable path.5. Select Run to start recognition of the cable path.Figure 46: Typical test setupfor passive cable path withActive Remote.
