IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide164.4.2 Basic settings4.4.2.1 Setting channel information@GCHI / @SCHI Channel informationFunction Getting SettingFormat @GCHI, type_1, ch_1, reserved_1 (,type_2, ch_2, reserved_2･･･)@SCHI, type_1, ch_1, reserved_1,mac_1, hdmi_1 (, type_2, ch_2,reserved_2, mac_2, hdmi_2･･･)Return value @GCHI, type_1, ch_1, reserved_1,mac_1, hdmi_1 (, type_2, ch_2,reserved_2, mac_2, hdmi_2･･･)@SCHI, type_1, ch_1, reserved_1,mac_1, hdmi_1 (, type_2, ch_2,reserved_2, mac_2, hidmi_2･･･)Parameter type_1 to type_512: Type1 = Input, 2 = Outputch_1 to ch_512: Channel1 to 512 = Channel1 to Channel512reserved_1 to reserved_512: Reservation“1” fixedmac_1 to mac_512: MAC address00 to FF = 8 bit (in hex) × 6 combinationshdmi_1 to hdmi_512:HDMI0 = All connectors, 1 to 4 = Connector1 to 4Example @GCHI,1,2,1@GCHI,1,2,1,0008E5690000,0Getting information of Input Channel2.All connectors whose MAC address is00:08:E5:69:00:00 are assigned.@SCHI,1,2,1,0008E5690000,0@SCHI,1,2,1,0008E5690000,0Assigning all connectors whose MACaddress is 00:08:E5:69:00:00 to InputChannel2.Completed normally.Remarks － |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine