IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide194.4.2.3 Setting audio@GAOS /@SAOSOutput audioFunction Getting SettingFormat @GAOS, type_1, ch_1, reserved_1(, type_2, ch_2, reserved_2･･･)@SAOS, type_1, ch_1, reserved_1,analog_1, hdmi_1 (, type_2, ch_2,reserved_2, analog_2, hdmi_2･･･)Return value @GAOS, type_1, ch_1, reserved_1,analog_1, hdmi_1 (, type_2, ch_2,reserved_2, analog_2, hdmi_2･･･)@SAOS, type_1, ch_1, reserved_1,analog_1, hdmi_1 (, type_2, ch_2,reserved_2, analog_2, hdmi_2･･･)Parameter type_1 to type_512: Type“2” fixedch_1 to ch_512: Channel0 = All channels, 1 to 512 = Channel1 to Channel512reserved_1 to reserved_512: Reservation“1” fixedhdmi_1 to hdmi_512: HDMI audio ouput2 = HDMI audio [Default], 3= Analog input audioanalog_1 to analog_512: Audio output connector2 = HDMI audio, 3= Analog input audio [Default]Example @GAOS,2,1,1@GAOS,2,1,1,2,3Getting audio setting of Output Channel1.HDMI audio output: HDMI audio; Audio outputconnector: Analog input audio@SAOS,2,1,1,2,3@SAOS,2,1,1,2,3Setting HDMI audio ouput of Output Channel1 tooutput analog input audio from HDMI audio outputand audio outout connector.Completed normally.Remarks － |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine