IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide304.4.5.2 CTB LAN settings@GIPS / @SIPS Setting LANFunction Getting SettingFormat @GIPS, type_1, ch_1, port_1 (,type_2,ch_2, port_2･･･)@SIPS, type_1, ch_1, port_1, mode_1,ip_1, mask_1, gateway_1 (,type_2, ch_2,port_2, mode_2, ip_2, mask_2,gateway_2･･･)Return value @GIPS, type_1, ch_1, port_1, mode_1,ip_1, mask_1, gateway_1 (,type_2,ch_2, port_2, mode_2, ip_2, mask_2,gateway_2･･･)@SIPS, type_1, ch_1, port_1, mode_1,ip_1, mask_1, gateway_1 (,type_2, ch_2,port_2, mode_2, ip_2, mask_2,gateway_2･･･)Parameter type_1 to type_512: Type0 = CTB, 1 = Input, 2 = Outputch_1 to ch_512:channel1 to 512 = Channel1 to Channel512port_1 to port_512: Connector1 to 2 = Connector1 to 2For other than CTB, ”1” fixedmode_1 to mode_512: Mode0 = Automatic (DHCP) [Default], 1 = Fixed“0” is selected, the following three parameters will be invalid.ip_1 to ip_512:IP address0 to 255 = 8 bit (in decimal) × 4 combinations[Default] Getting automaticallymask_1 to mask_512: Subnet mask0 to 255 = 8 bit (in decimal) × 4 combinations[Default] Getting automaticallygateway_1 to gateway_512: Default gateway0 to 255 = 8 bit (in decimal) × 4 combinations[Default] Getting automaticallyExample @GIPS,1,1,1@GIPS,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254Getting LAN setting of Input channel1.・Mode: Fixed・IP address:192.168.3.2・Subnet mask: 255.255.255.0・Default gateway: 192.168.3.254@SIPS,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254@SIPS,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254Setting LAN of Input channel1 as follows:・Mode: Fixed・IP address: 192.168.3.2・Subnet mask: 255.255.255.0・Default gateway: 192.168.3.254Completed normally.Remarks － |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine