IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide324.4.6 Maintenance4.4.6.1 CTB version querry@GIVC VersionFunction GettingFormat @GIVC, type_1, ch_1, reserved_1 (, type_2, ch_2, reserved_2･･･)Return value @GIVC, type_1, ch_1, reserved_1, model_1, version_1 (, type_2, ch_2, reserved_2,model_2, version_2･･･)Parameter type_1 to type_512: Type0 = CTB, 1 = Input, 2 = Outputch_1 to ch_512: Channel1 to 512 = Channel1 to Channel512reserved_1 to reserved_512: Reservation“1” fixedmodel_1 to model_512: Product modelversion_1 to version_512: Firmware versionExample @GIVC,0,0,1@GIVC,0,0,1,NJR-CTB,1.0.0Getting the information of the CTB.・Product model: NJR-CTB・Firmware version: 1.0.0Remarks －4.4.6.2 Initialization and Reboot@CLRC Initializing settingFunction SettingFormat @CLRC, type _1, ch_1, reserved_1, comm_setting_1, (,type _2, ch_2, reserved_2,comm_setting_2･･･)Return value @CLRC, type _1, ch_1, reserved_1, comm_setting_1 (,type _2, ch_2, reserved_2,comm_setting_2･･･)Parameter type_1 to type_512: Type0 = CTB, 1 = Input, 2 = Outputch_1 to ch_512: Channel0 = All channels, 1 to 512 = Channel1 to Channel512reserved_1 to reserved_512: Reservation“1” fixedcomm _setting_1 to comm_setting_512: Communication setting (initializing LAN andRS-232C)0 = Disabled [Default], 1 = EnabledExample @CLRC,1,2,1,0@CLRC,1,2,1,0Initializing settings of input channel2,except for communication setting.Completed normally.Remarks － |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine