IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide214.4.3 Setting transmission4.4.3.1 Video and audio@GWDS /@SWDSVideo and audio transmissionFunction Getting SettingFormat @GWDS, type_1, ch_1, reserved_1(, type_2, ch_2, reserved_2･･･)@SWDS, type_1, ch_1, reserved_1,mode_1, free_1 (, type_2, ch_2,reserved_2, mode_2, free_2･･･)Return value @GWDS, type_1, ch_1, reserved_1,mode_1 (, type_2, ch_2, reserved_2,index_2, mode_2･･･)@SWDS, type_1, ch_1, reserved_1,mode_1, free_1 (, type_2, ch_2,reserved_2, mode_2, free_2･･･)Parameter type_1 to type_512: Type1 = Input, 2 = Outputch_1 to ch_512: Channel0 = All channels (only for setting), 1 to 512 = Channel1 to Channel512reserved_1 to reserved_512: Reservation“0”fixed.mode_1 to mode_512: Mode0 = Stop [Default], 1 = Transmit or ReceiveFor setting output channel, only “0” can be set.free_1 to free_512: Initialization of transmission address0 = Disabled [Default], 1 = Enabled@GWDS,1,1,0@GWDS,1,1,0,1Getting video / audio transmission status ofInput Channel1.Being transmitted.Example @SWDS,1,1,0,0,1@SWDS,1,1,0,0,1Stopping video / audio transmission of InputChannel1 and initializing the transmissionaddress.Completed normally.Remarks For getting, the Ouput Channel is the same for video and audio. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine