IDK IP-NINJAR NJR-CTB Cli Command Reference Manual
                                  | |
Contents
| 
NJR-CTB Command Guide294.4.5 Setting communication interface values4.4.5.1 Setting RS-232C@GRSS /@SRSSRS-232C communication settingFunction Getting SettingFormat @GRSS, type, ch, reserved @SRSS, type, ch, reserved,baudrate,databit, stopbit, parityReturn value @GRSS, type, ch, reserved,baudrate,databit, stopbit, parity@SRSS, type, ch, reserved,baudrate,databit, stopbit, parityParameter type: Type1 = Input, 2 = Outputch: Channelch_1 to ch_512: Channel0 = All channels (only for setting), 1 to 512 = Channel1 to Channel512reserved: Reservation“1”fixed.baudrate: Baud rate0 = 4800 bps, 1 = 9600 bps [Default], 2 = 19200 bps, 3 = 38400 bps,4 = 57600 bps, 5 = 115200 bpsdatabit: Data bit length7 = 7 bit, 8 = 8 bit [Default]stopbit: Stop bit1 = 1 bit [Default], 2 = 2 bitparity: Parity check0 = NONE [Default], 1 = ODD, 2 = EVENExample @GRSS,1,1,1@GRSS,1,1,1,4,8,1,0Getting RS-232C communication setting ofInput Channel1.・Baud rate: 57600 bps・Data bit length: 8 bit・Stop bit: 1 bit・Parity check: NONE@SRSS,1,1,1,4,8,1,0@SRSS,1,1,1,4,8,1,0Setting RS-232C communication setting ofInput Channel1 as follows:・Baud rate: 57600 bps・Data bit length: 8 bit・Stop bit: 1 bit・Parity check: NONECompleted normally.Remarks － |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine