IDS X16 Training Manual
Also see for X64: User manualUser manualInstaller manualInstaller manualManual
                                                                                       | |
Contents
| 
24 Communication Settings | IDS X Series Training V2.3Location 37: Zone Status Verify CountLocation Type: StandardThe number of times a burglary event will be sent if the zone does not restore once the siren times out.After the number in this location is reached the zone will be ignored until it restores.Valid Range: 0 to 16Default: 0Communication SettingsLocation 40: Serial Communication FormatLocation Type: StandardThis is to configure the X-Series alarm system to communicate to the serial device using the correct formatNote: For serial communication jumper J1 must be shorted / closed.J1 open = direct download enabled; closed = serial reportingLocation 41 to 44: Communication formatLocation Type: StandardThis is the language the Alarm Panel must transmit for the equipment in the control room to understandwhat is being reported. Each phone number can be enabled to communicate in a different format.Note: For Contact ID and SIA formats, their event reporting codes are automatically entered intoreporting locations. Locations 501 to 588 enable or disable reporting for Contact ID and SIA.All other formats, the reporting codes must be entered manually into location 300 to 373.Location 45: Communication DelayLocation Type: StandardThis is the time the alarm will wait before reporting an event; it must be enabled under partition options inlocations 221 to 228.Data Format: mmssValid Range: 0001 to 5959Default: 0000Value Format Name Description0 Ademco Express Dual Tone HS, DTMF1 FBI 4 x 2 ( With Parity) 1.8kHz TX, 2.3kHz HS, 40PPS2 FBI 4 x 2 (No Parity) 1.8kHz TX, 2.3kHz HS, 20PPS3 Silent Knight 4 x 2 Fast 1.9kHz TX, 1.4kHz, 20PPS4 Silent Knight 4 x 2 Slow 1.9kHz TX, 1.4kHz, 20PPS5 Contact ID Dual Tone HS, DTMF7 SIA Reporting Bell 103 FSK, HSValue Format Name Description0 Ademco Express Dual Tone HS, DTMF1 FBI 4 x 2 ( With Parity) 1.8kHz TX, 2.3kHz HS, 40PPS2 FBI 4 x 2 (No Parity) 1.8kHz TX, 2.3kHz HS, 20PPS3 Silent Knight 4 x 2 Fast 1.9kHz TX, 1.4kHz, 20PPS4 Silent Knight 4 x 2 Slow 1.9kHz TX, 1.4kHz, 20PPS5 Contact ID Dual Tone HS, DTMF7 SIA Reporting Bell 103 FSK, HS |
Related manuals for IDS X64
manualsdatabase
Your AI-powered manual search engine