IDS X16 Training Manual
Also see for X64: User manualUser manualInstaller manualInstaller manualManual
                                                                                       | |
Contents
| 
84 Alarm Memory | IDS X Series Training V2.3Changing PartitionsThis option allows a user to access different partitions on a keypad.[Mode] [1] [*] [Partition] [*]Note: This will only be available if the keypad is a global keypad. (Keypad Options Location 251 to258)Changing Stay ProfilesThere are four stay profiles that can be created for different requirements, for example: When staying athome in the evening the outside detectors can be activated while the indoor detectors are bypassed.Then when going to bed all external and internal detectors except the bedrooms are made active bychanging the profile.[Mode] [2] [*] [Stay Profile] [*]Setting Outputs 1 to 5Outputs, one to five, can be manually triggered on or off, via the keypad.[Mode] [3] [*] [Output [*]Alarm MemoryAlarm memory holds information on zones that triggered, tampered with and bypassed for the arm cyclethat has just been disarmed. Once the system arms again this information is cleared, ready for any newinformation to store.To access this information: press and hold [0] until the beep.Key press Information displayed ExplanationHold [0] until beep Any zones that wereviolatedAll zones that triggered while the system was armed willbe displayedPress [2] [*] Zones that were bypassed Any zones that were bypassed for that arm cyclePress [3][*] Tampered zones All zones that were fiddled with and their tampermonitoring circuits triggeredPress [6] [*] Event logPress and holduntil beep MenuOptionPartitionNumberPress andhold untilbeepStay ProfileMenu OptionStay ProfileNumberPress andhold untilbeepOutputtriggering MenuOptionOutput Number |
Related manuals for IDS X64
manualsdatabase
Your AI-powered manual search engine