IDS X64 User Manual

Also see for X64: Training manual User manual Installer manual Installer manual Manual

IDS X64 User Manual Manual pdf 13 page image

Section: 6IDS X64 LCD Keypad User Manual 700-411-01C Issued August 2010 13 The keypad buzzer will beep 5 times. A medical reporting code will be reported to the monitoring company.6.4 Duress Alarms[#] + [DURESS CODE] This is a special user code that should only be used in the unique situation where an intruderforces one to disarm the system “under duress”. When a [DURESS CODE] is entered, the control panel disarms. A Duress Alarm Code (ifprogrammed) will be reported to the monitoring company. It is advisable to choose a Duress code that can be easily remembered by everyone.7. Alarm MemoryThe Alarm Memory displays any zones that were tampered, violated, or bypassed during the last armcycle. A flashing ARM LED notifies the user of an Alarm Memory condition. To view the Alarm Memory,disarm the panel and continue as follows:(Hold down the [0] key for two seconds until the keypad buzzer sounds)1. Hold down [0] until the keypad buzzer beeps.2. The ARM and POWER LEDs will turn off and the keypad buzzer will sound briefly.3. Use the [MED] or [PANIC] keys to scroll through the zones violated during the last armedperiod.4. Press the [1] key to return to violated zones.5. Press the [2] key to display zones that were bypassed.6. Press the [3] key to display which zones were tampered.7. Press the [6] key followed by the [*] key to view the event log.8. The Alarm Memory is erased at the beginning of each arm cycle.7.1 Event LogWhen you view event logs, the LCD display reads as follows:“HH:MM DD/MM/YYYY”“eeeeeeeeee p ddd”Where;HH:MM = event timeMM-DD- YYYY = event dateeeeeeeeeee = event descriptionp = partition event occurred in (if applicable)ddd = event data (if applicable)1. The system time and date need to be setup correctly in order for the event log to pull the correctinformation. These can be setup in options 40 and 41.2. When the event log menu is entered, a reference will be taken of the last event recorded. Anyevent prior to this reference may be viewed by scrolling back (with the [MED] key) but if the userdecides to scroll forward (with the [PANIC] key) then just events up to and including thisreference point will be viewable.