IDS X64 User Manual

Also see for X64: Training manual User manual Installer manual Installer manual Manual

IDS X64 User Manual Manual pdf 7 page image

Section: 1IDS X64 LCD Keypad User Manual 700-411-01C Issued August 2010 71. Introduction to the IDS X64 LCD Digital KeypadThis elegant and user friendly LCD Keypad will allow you easy ac cess to your security system‟s functionsand information at the touch of a button. The 32-character screen will display menus and messages toguide you through the system‟s operation, so please read this manual carefully, and have your Installerexplain basic system operation.2. Viewing Violated ZonesHold down [MODE] until the beep,then enter [4] [*] [DISPLAY OPTION] [*]There are two ways in which to view violated zones in real time. The first is the standard way that has thescrolling text. This way will say “P(partition number) Ready to Arm” if there are no violated zones,otherwise, it will display “V(zone Number) (zone name)” for about 3 seconds for each violated zone.EXAMPLE:If there are no zone violations, the keypad will alternate flashing betweenP1 Ready to Arm and P1 Ready 10:01If there is a zone violation, the keypad will alternate flashing betweenP1 Not Ready and P1 Not Rdy 10.01 with V05 Zone 05 flashing underneath.NOTE:P1 indicates the partition number.V05 indicates the zone number that has been violated.10:01 indicates the time.The other way mimics the LED keypad. It displays both the normal and violated zones of 64 zonessimultaneously. A centred dot will represent a normal zone, and a full black flashing rectangle willrepresent a violated zone.The above figure shows that zones 2, 23, and 24 have been violated.The display options are [1] for LCD mode with the scrolling text, or [2] for LED mode.