KINO-CVR-D25502/N26002P a g e 424.1 An ti-s ta tic P re c a u tio n sWARNING:Failure to take ESD precautions during the installation of theKINO-CVR-D25502/N26002 may result in permanent damage to theKINO-CVR-D25502/N26002 and severe injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the KINO-CVR-D25502/N26002. Dry climates are especially susceptible to ESD.It is therefore critical that whenever the KINO-CVR-D25502/N26002 or any other electricalcomponent is handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the board. Self-grounding: Before handling the board, touch any grounded conductingmaterial. During the time the board is handled, frequently touch anyconducting materials that are connected to the ground. Use an anti-static pad: When configuring the KINO-CVR-D25502/N26002,place it on an antic-static pad. This reduces the possibility of ESD damagingthe KINO-CVR-D25502/N26002. Only handle the edges of the PCB: When handling the PCB, hold the PCBby the edges.
