KINO-CVR-D25502/N26002P a g e 64 Disabled Disables the use of hyper-threading technology Enabled D EFAULT Enables the use of hyper-threading technology5.3.5 S ATA Co n fig u ra tio nUse the SATA Configuration menu (BIOS Menu 7) to change and/or set theconfiguration of the SATA devices installed in the system.Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.AdvancedSATA ConfigurationSATA Port1 Not PresentSATA Port2 Not PresentSATA Port3 Not PresentSATA Port4 Not PresentSATA Port5 Not PresentSATA Port6 Not PresentSATA Mode [IDE Mode]Serial-ATA Controller 0 [Compatible]Serial-ATA Controller 1 [Enhanced](1) IDE Mode. (2) AHCIMode. (3) RAID Mode.---------------------: Select Screen↑ ↓: Select ItemEnter Select+/-: Change Opt.F1 General HelpF2 Previous ValuesF3 Optimized DefaultsF4 Save & ExitESC ExitVersion 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.BIOS Menu 7: IDE Configuration S ATA Mo d e [IDE Mo d e ]Use the SATA Mode option to configure SATA devices as normal IDE devices. IDE Mode D EFAULT Configures SATA devices as normal IDE device. ACHI Mode Configures SATA devices as AHCI device. RAID Mode Configures SATA devices as RAID device. S e ria l-ATA Co n tro lle r 0 [Co m pa tib le ]Use the Serial-ATA Controller 0 option to configure the Serial-ATA controller mode whenthe SATA mode is set to IDE Mode.
