32PANEL DESCRIPTIONNew2001t POWER KEY [POWER] (p. 8)➥ Push to turn power ON and OFF.• The transceiver does not turn power ON when the connectedPC-250 dc-dc power supply is turned OFF.• After turning power ON, the 9-digit MMSI code appears for 2sec., if programmed.• When no MMSI code is programmed, “NO MMSI” is dis-played at power ON, and then the MMSI code programmingis required.➥ While pushing and holding [H/L], turn power ON to ac-tivate the AquaQuake function. (p. 13)➥ While pushing and holding [⁄6•C], turn power ON toenter Set mode. (p. 106)y DIAL KEY [DIAL]➥ Push to select to the regular channel. (pgs. 7, 8)➥ While pushing and holding [H/L], push to select one ofthree channel groups in sequence depending on ver-sion. (p. 8)• EUR version has International channels only and this func-tion is not available.u SQUELCH CONTROL [SQL] (p. 8)Rotate to set the squelch threshold level.i MIC CONNECTORConnect the optional hand microphone only. (p. 116)CAUTION: NEVER connect the optional handset(HS-98) here.o VOLUME CONTROL [VOL] (p. 8)Rotate to adjust the audio level.!0 TRANSMIT POWER KEY [H/L]➥ Push to toggle the output power high or low. (p. 8)• Some channels are set to low power only.➥ While pushing and holding this key, some keys performsecondary functions.!1 SELECTOR DIAL [SELECTOR] (pgs. 7, 8, 106)Rotate to select the operating channels, set mode con-tents, etc.!2 CHANNEL 16/CALL CHANNEL KEY [⁄6•C]➥ Push to select Channel 16. (p. 7)➥ Push and hold for 1 sec. to select call channel. (p. 7)• “CALL” appears when call channel is selected.➥ Push and hold for 3 sec. to enter call channel program-ming condition when call channel is selected. (p. 10)!3 KEYPAD➥ Inputs numeral for channel number input, etc.• After inputting the desired channel number, push [ENT].• Push and hold [0•A] to input ‘A’ for simplex channels.➥ Inputs numeral, alphabet and some symbols for chan-nel comment input.➥ After pushing [F], push to perform the secondary function.• Most of secondary function (except TAG channel setting;p. 16, print out operation; p. 12) can be cleared or cancelledwhen [CLR] is pushed.12345678910111213141516
