276DSC OPERATIONNew2001y Push [CLR] to return to the DSC Set up menu.• Push [ENT] to delete the selected group ID. (see step t)• Push [F], then push [8• PRT ] to print out all the programmedgroup ID.u Rotate [SELECTOR] to select “Exit,” push [ENT] to re-turn to DSC menu.• Pushing [CLR] also returns to DSC menu.--DSC Menu--Set upDSC Data Output ≤CH70 SQL LevelMedical TransportsNeutral Ship CallSelf Check Test˘ExitPushRotateSELECTORi Rotate [SELECTOR] to select “Exit,” push [ENT] to re-turn to the normal operation condition.• Pushing [CLR] also returns to the normal operation condition.--DSC Menu--Select ItemDistress Call ≤Received Call LogPosition RequestTest CallSet up˘ExitPushRotateSELECTORn Position and Time programmingA Distress call should include the ship’s position and timedata. If no GPS is connected, your position and UTC(Universal Time Coordinated) time should be input manually.They are included automatically when a GPS receiver(IEC61162-1: 2000 format) is connected.• This manual programming is not available when a GPSreceiver (IEC61162-1: 2000 format) is connected.• Manually programmed position/time data will be held for23.5 hours only.q Push [MENU] to enter the DSC menu.w Rotate [SELECTOR] to select “Position Input,”push [ENT].--DSC Menu--Select Item˘Position InputDistress RelayAll Ships CallIndividual CallGroup CallDistress Call ≥PushRotateSELECTOR☞Continue to the next page12345678910111213141516
