646 DSC OPERATIONNew2001D Transmitting a Position Reply callTransmit a Position Reply call when a Position Request isreceived. (p. 87)To transmit a “Position Reply”— Quick ACK:➥ After a Position Request call is received, push [CLR] tostop the alarm, then rotate [SELECTOR] to indicate thereceived message log. And then, push [ENT].Go to step u at p. 67 when the transceiver receivesthe GPS data, or go to step r at p. 65 when the trans-ceiver has no position/time data or manual input posi-tion/time data.)To transmit “Position Reply”— Manual ACK:q Push [MENU] to enter the DSC menu, then rotate [SELEC-TOR] to select “Position Reply,” push [ENT].• “Position Reply” is added to the DSC menu after receiv-ing a position request call.--DSC Menu--Select ItemDistress Call ≤Received Call LogPosition Request˘Position ReplyTest CallSet up ≥ PushRotateSELECTORw Rotate [SELECTOR] to select the desired individual ad-dress or ID code, push [ENT].--DSC Menu--Select Address˘Station 1Station 2Station 3PushRotateSELECTORe The call information appears, push [ENT].--DSC Menu--Position Request InfoFrom Station 2SafetyPushWhen the transceiver receives the GPS data from theconnected GPS receiver, the following screens (steps rto y) do not appear. Go to step u at p. 67.
