1158CONNECTIONS AND MAINTENANCENew200112345678910111213141516n MB-75 installationAn optional MB-75 flush mount kit is available for mountingthe transceiver to a flat surface such as an instrument panel.CAUTION: KEEP the transceiver and microphone at least1 meter away from your vessel’s magnetic navigationcompass.q Using the attached template, carefully cut a hole intothe instrument panel (or wherever you plan to mount thetransceiver).w Slide the transceiver through the hole as shown below.e Attach the 2 supplied bolts (M5 × 8 mm) on either side ofthe IC-GM651.r Attach the clamps on either side of the IC-GM651.• Make sure that the clamps align parallel to the IC-GM651’s body.ClampSupplied boltt Tighten the end bolts on the clamps (rotate clockwise) sothat the clamps press firmly against the inside of the in-strument control panel.y Tighten the locking nuts (rotate counterclockwise) so thatthe IC-GM651 is securely mounted in position as below.End boltLocking nuttyu Connect the antenna and power cable, then return theinstrument control panel to its original place.
