62 PANEL DESCRIPTIONNew2001t TIME ZONE INDICATOR➥ Shows the current time data when a GPS receiver isconnected.• “??” and the last received time data may blink alternatelyevery 2 sec. instead of current time data when the GPS cur-rent time data is invalid.• “??” and the last received time data may blink alternatelyevery 2 sec. instead of current time data 4 hours after thetime data is input manually, up until 23.5 hours have past.➥ “No Time” appears when no GPS receiver is con-nected and no time data is input manually.➥ “ ” appears when a GPS receiver is connected.y POSITION INDICATOR➥ Shows the GPS position data.• “??” and the last received position data may blink alternatelyevery 2 sec. instead of position data when the GPS positiondata is invalid. In such a case, the last position data is heldfor up to 23.5 hours.• “??” and the last received position data may blink alternatelyevery 2 sec. instead of position data 4 hours after the posi-tion data is input manually, up until 23.5 hours have past.➥ “No Position” appears when no GPS receiver isconnected and no position data is input manually.u SCAN INDICATOR➥ “PRI-SCAN 16” appears during Priority scan;“NORMAL SCAN” appears during Normal scan.(p. 16)➥ “DUAL 16” appears during Dualwatch; “TRI 16” ap-pears during Tri-watch. (p. 14)i TAG CHANNEL INDICATOR (p. 16)Appears when a TAG channel is selected.o BUSY/TRANSMIT INDICATOR➥ “BUSY” appears when receiving a signal or when thesquelch opens. (p. 8)➥ “TX” appears while transmitting. (p. 9)!0 POWER INDICATOR (p. 8)➥ “25W” appears when high power is selected.➥ “1W” appears when low power is selected.!1 DUPLEX INDICATOR (p. 8)Appears when a duplex channel is selected.!2 CHANNEL GROUP INDICATOR (p. 8)Indicates when an International “INT” channel is in use.(Depends on version)