41MEMORY CHANNELS7 GeneralThe receiver has 2600 memory channels for storage of often-used frequencies. Total of 26 memory banks are available forusage by group, etc., and 100 channels are assigned into abank.D Memory channel contentsThe following information can be programmed into memorychannels:• Memory channel name• Operating frequency (p. ??)• Duplex direction (p. ??)• Offset frequency (p. ??)• Receive mode (p. ??)• IF filter selection (p. ??)• Attenuator ON/OFF (p. ??)• Tuning step (p. ??)• Select memory scan setting (p. ??)• Memory skip scan setting (p. ??)• Squelch control system ON/OFF and it’s frequency orcode (p. ??)• Remark (memory channel comment) (p. ??) Bank name programmingEach memory bank can be programmed with an alphanu-meric bank name for easy recognition and can be indicatedindependently. Names can be a maximum of 20 characters.q Click “ ” on the tool bar to call up the [Memory ChannelEditor] screen if it is not displayed.w Click [YY] or [ZZ] to select a memory bank.e Click the bank name dialog box.• A cursor starts blinking.r Program the desired bank name (up to 20-character) fromthe PC keyboard, then push [Enter].• The programmed name is displayed on the function display.tAfter programming, click close button ([X]) to close thememory channel list screen.