Icom IC-PCR1500 Instruction Manual

Also see for IC-PCR1500: Instruction manual Service manual Service manual

447MEMORY CHANNELS12345678910111213141516 Memory channel programming100 memory channels are assigned into a memory bank (0to 25), and the following information can be stored.• Bank name, memory name, frequency, duplex direction, offset fre-quency, mode, filter, attenuator, tuning step, select memory scan,skip channel, tone squelch and remark.D Using the multi-function receiver screen orcomponent screenq Click [BANK YY] or [BANK ZZ] to select a memory bank tobe programmed.w Click [MEMO YY] or [MEMO ZZ], or click numeral buttons (1to 0) to input the desired memory channel number, thenclick [Mch] to select a memory channel to be programmed.e Set a frequency, mode, etc. that you want to memorize.r Click the [MW] to program the displayed frequency into theselected memory channel.D Using the memory channel list screenq Click “ ” on the tool bar to call up the [Memory ChannelEditor] screen if it is not displayed.wClick [YY] or [ZZ], or select the bank name (p. ??) with [ZZ] toselect the desired memory bank.eClick [Frequency] cell on the desired memory channel, andset the receive frequency from the keyboard. Then push[Enter].Program the receive frequency first, otherwise no settingcan be done except for the name.rDouble-click the desired cell directory, or right-click the cellthen click [Edit... Enter] to set other items such as duplexdirection, mode, tuning step, etc., if desired.• You can click the pull down menu to select and change the chan-nel setting depends on the item.• You can edit it directly.r Click the [RX Entry] to set the edited data to the multi-function receiver screen or component screen.tAfter editing, click close button ([X]) to close the memorychannel list screen.