427MEMORY CHANNELS12345678910111213141516 Memory channel selectionD Using the YY/ZZ button on the multi-functionreceiver screen or component screenq Click [BANK YY] or [BANK ZZ] to select the desired mem-ory bank.w Click [MEMO YY] or [MEMO ZZ] to select the desired mem-ory channel.D Using the [Mch] button on the multi-functionreceiver screen or component screenClick numeral buttons (1 to 0) to input the desired memorychannel number, then click [Mch] to select the memory chan-nel.• When making a mistake while inputting a memory channel, click[CE] to clear the input and return to the previous frequency indica-tion.D Using the simple function receiver screenq Click the [BANK] button and select a desired memorybank.w Click a numeral button, [1] – [5], to select memory chan-nels 1 – 5.• Use the memory list screen to select memory channels 6to 50.D Using the memory channel list screenq Click “ ” on the tool bar to call up the [Memory ChannelEditor] screen if it is not displayed.w Click [YY] or [ZZ] or select a bank name with [ZZ] to select amemory bank.e Click the desired memory channel to be called up, thenclick [RX Entry] to set the edited data to the multi-functionreceiver screen or component screen.