59TONE SQUELCH OPERATION10 Tone/DTCS squelch operationThe tone or DTCS squelch opens only when receiving a sig-nal with the same pre-programmed subaudible tone or DTCScode, respectively in FM mode. You can silently wait for thespecified signal using the same tone.D Tone squelch frequency settingqClick [FM] to select FM mode.wClick [TSQL] to turn the tone squelch ON.• “TSQL” appears in the function display.eRight-click [TSQL] to display the [TSQL] setting screen.rClick [ZZ] to select the desired tone squelch frequency.• 51 tone frequencies from 67.0 to 254.1 Hz are available.tCheck the [Reverse Action] check box to mute the receivedaudio signal when the received signal’s tone is matched.• “ ” appears in the function display.yClick the close button ([X]) to close the [TSQL] settingscreen.uWhen the received signal includes a matching tone,squelch opens and the signal can be heard.• When the [Reverse Action] check box is checked in step t, thereceived audio signal is muted.• When the received signal’s tone does not match, tone squelchdoes not open, however, the S-indicator shows signal strength.iClick [TSQL] again to cancel the tone squelch.• “TSQL” disappears.• Available tone squelch frequencies list67.069.371.071.974.477.079.782.585.488.591.594.8097.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1

supplied accessories

hardware installation

tnc connection

driver installation

I Function display

I Rear panel

SETTING A FREQUENCY

squelch level setting

I Receive mode selection

automatic mode selection

I Monitor function

other functions

I AFC function

follows

IC-PCR1500

memory channel clearing

memory channel programming

saving memory channel data

scan resume condition

scan speed setting

i auto memory write scan

priority watch

tone squelch operation

dtcs polarity setting

band scope

audio setting screen

multi channel monitor

Icom IC-PCR1500 Instruction Manual

mouse property setting

system requirements

Hardware installation

TNC connection

Accessory attachments

DRIVER INSTALLATION

panel description

main unit

Starting the control software

Closing the control screen

Setting a frequency

Setting a tuning step

Audio level setting

Squelch level setting

Receive mode selection

Automatic mode selection

Monitor function

Duplex operation

AFC function

NB function

VSC function

weather channel operation

Squelch delay setting

Diversity operation (IC-PCR2500 only)

Main/Sub band selection (IC-PCR2500 only)

MEMORY CHANNELS

Memory channel programming

Editing the memory list

Memory channel clearing

Saving memory channel data

scan operation

programmed scan

auto memory write scan

versatile memory scan

priority scan

DTCS polarity setting

changing the automatic sweep step limit

Wide band scope function

Audio setting screen

beep settings

Multi channel monitor

Recording operation

Sampling Rate setting

Remote recording function

Short cut key operation

DSP OPERATION ANF function

Digital mode operation

DV digital squelch function

P25 mode setting

P25 digital squelch function

Digital menu indication

DV Digital menu

P25 Digital menu

OPTIONAL UNIT INSTALLATION

INTERNAL AUDIO SWITCH

USB PORT SETTING

USB audio setting

TROUBLESHOOTING

Options

LOGIC UNIT

MAIN-A UNIT

PLL CIRCUITS

DIGITAL MODE OPERATION WITH UT-122

POWER SUPPLY CIRCUITS

CPU PORT ALLOCATION

PREPARATION

MAIN-A UNIT ADJUSTMENT

MAIN-B UNIT ADJUSTMENT (PCR2500 only)

top view