144BASIC OPERATION4ns-ni-tc.se-di-)cy).EX”r While pushing [FUNC], rotate [DIAL] to select “ON.”t Rotate [DIAL] to select “OFFSET.”• “OFFSET” disappears after 1 sec. and “0.000” (default) and“OW” appear.yWhile pushing [FUNC], rotate [DIAL] to set the desired off-set frequency within 0.000–159.995 MHz range.• The tuning step, selected in VFO mode, is used for setting.u Rotate [DIAL] to select “DUP.”• “DUP” disappears after 1 sec. and “OFF” (default) and “DP” ap-pear.iWhile pushing [FUNC], rotate [DIAL] to select “–DUP” or“+DUP.”o Push [TS•SET] to exit set mode.!0Push and hold [SQL] to monitor the transmit station fre-quency (repeater input frequency) directly.Duplex item Setting indicationAfter 1 sec.Offset frequency item Setting indicationAfter 1 sec.DE
