setg-tDD Scan resume timerThe scan re-starts after a signal disappears according to theresume time. it can be set from 0–5 sec. or unlimited.q Push [TS•SET] for 1 sec. to enter set mode.w Rotate [DIAL] to select “EXPAND” item.eWhile pushing [FUNC], rotate [DIAL] to turn the expand setmode selection ON.r Rotate [DIAL] to select “RESUME” item.tWhile pushing [FUNC], rotate [DIAL] to set the desiredscan pausing time from 0–5 sec. (1 sec. steps) and“HOLD.”• “0SEC” : Scan restarts immediately after the signal dis-appears.• “1SEC”–“5SEC” : Scan restarts 1–5 sec. after the signal disap-pears.• “HOLD” : Scan restarts by rotating [DIAL] only.y Push [TS•SET] to exit set mode.[TS•SET][FUNC][DIAL]• Resume timer settingSetting indicationAfter 1 sec.USING EXPANDED SET MODE
